Papers

Hidenobu Murata, Mikio Yamanoi, Yoshihiro Suzuki：“Inverse analysis of friction coefficient in discrete element method using powder properties by support vector regression”, Journal of the Ceramic Society of Japan(2024)

Masahiro Kondo, Takahiro Fujiwara, Issei Masaie & Junichi Matsumoto：“A physically consistent particle method for high-viscous free-surface flow calculation”, Computational Particle Mechanics (2021)

Sunao Tokura：“Recent Application Examples of MPS based CFD software Particleworks”, 36th International CAE Conference and Exhibition (2020)

Sunao Tokura, Shun Fujimoto：“Simulation of Fire Protection Equipment for Important Buildings using Particle Method based CFD Technique”, The 3rd International Conference on COMPSAFE2020 (2020)

Mikio Yamanoi, Tatsuki Kawahara and Minoru Ito：“Discrete Element Method simulation of wet granulation”, PARTEC (2019).

Mikio Yamanoi：“Basics and Industrial Applications of DEM Simulation”, 1st Taiwan-Japan Workshop on Powder Processing Technology for High Quality Products (2019).

Mikio Yamanoi, Yoichi Nakata：”BASICS AND APPLICATION OF SCALABLE DEM METHOD”, 9th International Conference on Conveying and Handling of Particulate Solids(CHOPS) (2018)

Mikio Yamanoi, Yoichi Nakata：”BASICS AND APPLICATION OF SCALABLE DEM METHOD”, the International Conference on Polymers and Moulds Innovations (PMI) (2018)

Robin Karlsson, Mikio Yamanoi, Yoichi Nakata：”Determining DEM Simulation Parameters through Machine Learning”, The Society of Powder, Japan 2017

Robin Karlsson, Mikio Yamanoi, Yoichi Nakata：”Introduction of an All-Speed Compressible 3D DEM-CFD Simulation Algorithm and its Evaluation through Experiment”, The Society of Powder, Japan 2017

K. Shibata, S. Koshizuka, T. Matsunaga, I. Masaie：”The overlapping particle technique for multi-resolution simulation of particle methods”, Computer Methods in Applied Mechanics and Engineering

Mikio Yamanoi, Yoichi Nakata: “SCALABLE-DEM SIMULATION OF CONDUCTIVITY THERMAL POWDER DYNAMICS IN INDIRECT HEAT TYPE DRYER”, The 20th International Drying Symposium

K. Shibata, S. Koshizuka and I. Masaie: “Cost Reduction of Particle Simulations by an Ellipsoidal Particle Model”, Comput. Methods Appl. Mech. Engrg. 307, 411-450 (2016)

K. Shibata, S. Koshizuka and I. Masaie: “Techniques for Reducing Simulation Cost of a Particle Method and Arranging Particles in Arbitrary Shapes”, Proc. 3rd Int. Conf. on Violent Flows (VF-2016), Osaka, March 9-11, 2016

K. Shibata, S. Koshizuka and I. Masaie: “Reduction of Simulation Cost and Expression of Arbitrary Smooth Wall Boundaries for the MPS Method”, 12th World Congress on Computational Mechanics (WCCM XII), 6th Asia-Pacific Conference on Computational Mechanics (APCOM VI), Seoul, July 24-29, 2016, 150955

K. Murotani, I. Masaie, T. Matsunaga, S. Koshizuka, R. Shioya, M. Ogino and T. Fujisawa: “Performance Improvements of Differential Operators Code for MPS Method on GPU”, Comput. Part. Mech. 2(3), 261-272 (2015)

K. Shibata, S. Koshizuka, K. Murotani, M. Sakai and I. Masaie: “Boundary Conditions for Simulating Karman Vortices Using the MPS Method”, J. Adv. Simulat. Sci. Eng. 2(2), 235-254 (2015)

K. Shibata, I. Masaie, M. Kondo, K. Murotani and S. Koshizuka: “Improved Pressure Calculation for the Moving Particle Semi-implicit Method”, Comput. Part. Mech. 2, 91-108 (2015), DOI 10.1007/s40571-015-0039-6 (2015)

K. Shibata, S. Koshizuka, K. Murotani and I. Masaie: “Tsunami SImulation by the MPS Method with the Overlapping Particle Technique”, Abstract Int. Conf. on Computational Engineering and Science for Safety and Environmental Problems (COMPSAFE2014), Sendai, April 13-16, 2014, p.180

Kazuya Shibata, Seiichi Koshizuka and Koji Murozono: “Application of the MPS method and the overlapping particle technique to naval architecture and ocean engineering”, III International Conference on Particle-based Methods. Fundamentals and Applications PARTICLES 2013,18-20 September, 2013, Stuttgart, Germany

Yoshiaki Hanada: “Particle-based CAE Software on Kepler”, GPU Technology Conference 2013

Kazuya Shibata, Seiichi Koshizuka, Tasuku Tamai and Koji Murozono: “Overlapping particle technique and application to green water on deck”, International Conference on Violent Flows (VF2012), Nantes, France, September 25-27, 2012, pp.106-111

Kazuya Shibata, Koji Murozono, Masahiro Kondo, Mikio Sakai and Seiichi Koshizuka: “Numerical modeling of gas-phase and negative pressure in a Lagrangian approach”, The 10th World Congress on Computational Mechanics (WCCM 2012), 18548, São Paulo, Brazil, 8 -13 July 2012

Shinya Kitaoka: “Particleworks: Particle-based CAE Software Fully Implemented on GPUs”, GPU Technology Conference Asia 2012

Yoshiaki Hanada, Issei Masaie: “Particle-based CAE Software Fully Ported on Multi-GPU”, GPU Technology Conference 2012, San Jose, California, USA (2012)

Issei Masaie, Kosuke Katsuki: “Particleworks: Particle-based CAE Software on Multi-GPU”, GPU Technology Conference 2010, San Jose, California, USA (2010)

Takahiro Harada, Issei Masaie, Seiichi Koshizuka, Yoichiro Kawaguchi: “Massive Particles: Particle-based Simulations on Multiple GPUs”, SIGGRAPH 2008 Talk

J. Tsuchida, T. Fujisawa and G. Yagawa: “COMPUTATIONAL FLUID DYNAMICS ON SOUNDING MECHANISM IN AIR-REED INSTRUMENTS”, Engineering Applicatinos of Computational Fluid Mechanics, Vol. 2, No. 3, pp. 375-381